ATTEND – Metric circular connectors M5 to M23: Metric circular connectors are standard in the industry and are used in a very wide range of applications. The Taiwanese manufacturer ATTEND offers a wide selection of M5, M8, M12 and M23 quality connectors with 2 to 12 pins.
ATTEND offers solutions for currents from 0.5 A to 20 A at 50 V to 250 V. These connectors are normally IP67 rated.
Standard and customized cable solutions are also available to match the range of connectors.
The space-saving 220A series connectors are A-coded and available with 2 to 4 pins depending on the version; the standard is 4:
The slightly larger M8 version is available with 2 to 8 pins. Here too, types are available for PCB, panel mount (straight or right-angled) and cable mounting.
The 219A are A coded. They are designed for currents from 1.5 A to 3 A and for voltages between 30 – 50 V (AC/DC). They are therefore suitable for connecting sensors and actuators in automation as well as fieldbus applications. They comply with the IEC 61076-2-104 standard.
The 229B series is 4-pin and is designed for Single-Pair Ethernet (SPE) applications with simultaneous power transmission and requires minimal space.
With M8 connectors, ATTEND also offers various standard cables with a length of 120 cm.
As the series names suggest, both A and D as well as X-coded connectors are available for the M12 types. The 216A series offers 2 to 12 pin variants.
These are intended for standard industrial applications that require both data signals and power transmission.
216D are 4-pole and are usually used for Industrial Ethernet.
The 216X, on the other hand, are 8-pin. These are suitable for data transmission at higher speeds such as Gigabit Ethernet or video applications.
The A-coded 221A connectors are intended for applications up to 250 V at 20 A and usually have 5 poles.
With IP67 and an approved temperature range of -40 to 85 °C, it can be used in harsh industrial environments in automation, robotics or transportation, as well as in medical devices.
The large variety allows the ideal selection for most applications. Please contact us for detailed information on which connector is available as a standard type by ATTEND. And if you are not bound to the metric standard and are looking for connectors made entirely out of plastic (PA66) with a bayonet lock, the 227x Serie with up to 25 pins is the ideal choice.
Contact us directly or send us your inquiry for ATTEND – Metric circular connectors M5 to 23 using the following form