RS9110-N-11-02 802.11bgn 2.4GHz Module

RS9110-N-11-24 with UART interface

RS9110-N-11-22-03

NOT RECOMMENDED FOR NEW DESIGNS FROM JANUARY 2012.  REPLACED WITH RS9110-N-11-22-05  DIRECT REPLACEMENT WITH NO HARDWARE OF SOFTWARE CHANGED REQUIRED.

The RS9110-N-11-22 module from Redpine's Connect-io-n™ family of products is a complete IEEE 802.11bgn based wireless device server that directly provides a wireless interface to any equipment with a serial or SPI interface for data transfer. It integrates a MAC, Baseband processor, RF transceiver with power amplifier, a frequency reference, and an antenna in hardware; and all WLAN protocol and configuration functionality, networking stack in embedded firmware to make a fully self-contained 802.11n WLAN solution for a variety of applications. No WLAN or networking functionality is required on the host system or data source. Based on the Redpine Signals RS9110 SoC that includes an embedded processor, it is designed to provide standards compliant wireless connectivity in Open and secure modes to devices and systems such as industrial equipment, medical electronic systems, POS equipment, sensor networks and metering equipment, M2M communications and remote configuration applications. As a wireless serial modem, the RS9110-N-11-22 originates and terminates TCP and UDP connections, enabling a variety of M2M applications at low cost and small footprint. It uniquely provides connectivity in the single stream 802.11n mode, preserving overall network throughput in the emerging enterprise environments.

Features

• Compliant to 802.11b/g and single stream 802.11n
• Fully self-contained serial-to-wireless functionality - does not require any host processor bandwidth
• Includes all the protocol and configuration functions required for WLAN connectivity in Open, WEP and WPA/WPA2-PSK modes of operation
• Payload data through Serial Interface and SPI
• Terminates TCP and UDP connections, and offers transparent serial modem functionality
• Configuration through AT commands and SPI frames
• Integrated antenna, frequency reference, and low-frequency clock
• Ultra low power operation with power save modes
• Ad-hoc and infrastructure modes for maximum deployment flexibility
• Single supply 3.1 to 3.6 V operation
• Certification : Module is based on RS9110-N11-02 which is certified by FCC, IC and CE.

RS9110-N-11-24-02 with SPI interface

RS9110-N-11-24-02

The RS9110-N-11-24-(xx) module from Redpine's Connect-io-n™ family of products is a complete IEEE 802.11bgn based wireless device server that directly provides a wireless interface to any equipment with a serial or SPI interface for data transfer. It integrates a MAC, baseband processor, RF transceiver with power amplifier; and all WLAN protocol functionality, networking stack in embedded firmware to make an 802.11n WLAN solution for a variety of applications. No WLAN or networking functionality is required on the host system or data source. The module is based on Redpine's 802.11n chipset - RS9110.

Features

• Compliant to 802.11b/g and single stream 802.11n
• Self-contained serial-to-wireless functionality - does not require any host processor bandwidth
• WPA/WPA2-PSK, WEP modes of security
• Host interfaces: UART and SPI
• Integrated TCP/IP stack with option to bypass in SPI modules through software configuration
• Configuration through AT commands and SPI frames
• Ultra low power operation with power save modes
• Ad-hoc and infrastructure modes for maximum deployment flexibility.
• Single supply 3.1 to 3.6 V operation
• Certification : Module is based on RS9110-N11-02 which is certified by FCC, IC and CE.

RS9110-N-11-28-04

RS9110-N-11-28-04

The RS9110-N-11-28-i(xx) module from Redpine's Connect-io-n™ family of products is a complete dual band (2.4/5GHz) IEEE 802.11abgn based wireless device server that directly provides a wireless interface to any equipment with a serial or SPI interface for data transfer. It integrates a MAC, Baseband processor, dual band RF transceiver with power amplifier and diplexer; and all WLAN protocol functionality, networking stack in embedded firmware to make a dual band 802.11n WLAN solution for a variety of applications. No WLAN or networking functionality is required on the host system or data source. The module is bBased on Redpine's 802.11n chipset - RS9110.

Features

• Compliant to 802.11b/g and single stream 802.11n
• 2.4/5 GHz, 802.11n RF transceiver with power amplifier
• Highly integrated 2.4 GHz/5 GHz transceiver with direct conversion architecture
• Self-contained serial-to-wireless functionality - does not require any host processor bandwidth
• WPA/WPA2-PSK, WEP and TKIP modes of security
• Host Interface: UART and SPI, selectable through a hardware pin
• Integrated TCP/IP stack with option to bypass in SPI mode through software configurationi
• Configuration through AT commands and SPI frames
• Ultra low power operation with power save modes
• Ad-hoc and infrastructure modes for maximum deployment flexibility.
• Single supply 3.1 to 3.6 V operation

RS9110-N-11-22-04 with integrated antenna & SPI/UART

802.11 bgn 2.4GHz with integrated antenna & SPI/UART interface

RS9110-N-11-22-04

The RS9110-N-11-22-04 module from Redpine's Connect-io-n™ family of products is a complete IEEE 802.11bgn based wireless device server that directly provides a wireless interface to any equipment with a serial or SPI interface for data transfer. It integrates a MAC, Baseband processor, RF transceiver with power amplifier, a frequency reference, and an antenna in hardware; and all WLAN protocol and configuration functionality, networking stack in embedded firmware to make a fully self-contained 802.11n WLAN solution for a variety of applications. No WLAN or networking functionality is required on the host MCU. The module is based on Redpine's 802.11n chipset - RS9110

Features

• Compliant to 802.11b/g and single stream 802.11n
• Self-contained serial-to-wireless functionality - does not require any host processor bandwidth
• WPA/WPA2-PSK, WEP, TKIP modes of security
• Host interface: UART and SPI, selectable through a hardware pin
• Integrated TCP/IP stack, with option to bypass in SPI mode through software configuration
• Configuration through AT commands and SPI frames
• Integrated antenna, frequency reference, and low-frequency clock
• Ultra low power operation with power save modes
• Ad-hoc and infrastructure modes for maximum deployment flexibility
• Single supply 3.1 to 3.6 V operation
• Certification : Module is based on RS9110-N11-02 which is certified by FCC, IC and CE.

RS9110-N-11-22-05 with uFL connector & SPI/UART

802.11 bgn 2.4GHz with uFL connector & SPI/UART interface

RS9110-N-11-22-05

The RS9110-N-11-22-(xx) module from Redpine's Connect-io-n™ family of products is a complete IEEE 802.11bgn based wireless device server that directly provides a wireless interface to any equipment with a serial or SPI interface for data transfer. It integrates a MAC, Baseband processor, RF transceiver with power amplifier, a frequency reference, and an antenna in hardware; and all WLAN protocol and configuration functionality, networking stack in embedded firmware to make a fully self-contained 802.11n WLAN solution for a variety of applications. No WLAN or networking functionality is required on the host MCU. The module is based on Redpine's 802.11n chipset - RS9110

Features

• Compliant to 802.11b/g and single stream 802.11n
• Self-contained serial-to-wireless functionality - does not require any host processor bandwidth
• WPA/WPA2-PSK, WEP, TKIP modes of security
• Host interface: UART and SPI, selectable through a hardware pin
• Integrated TCP/IP stack, with option to bypass in SPI mode through software configuration
• Configuration through AT commands and SPI frames
• Integrated antenna, frequency reference, and low-frequency clock
• Ultra low power operation with power save modes
• Ad-hoc and infrastructure modes for maximum deployment flexibility
• Single supply 3.1 to 3.6 V operation
• Certification : Module is based on RS9110-N11-02 which is certified by FCC, IC and CE.

RS9110-N-11-03 802.11abgn 2.4/5GHz Module

RS-WC-201

RS-WC-201

RS-WC-201 belongs to the WiSeConnect™ family of advanced Wi-Fi modules. It is a fully integrated 802.11 b/g/n module with advanced features for M2M, industrial, medical, enterprise and IOT (Internet of Things) applications. Powered with WiFi-Direct™, it can directly communicate with smartphones and tablet PCs over without an Access Point based infrastructure. Integrated with Enterprise Security as well as TCP/IP and WLAN stacks, it can be designed quickly into any Host platform for secure and standards based WiFi connectivity in a variety of environments. Requiring no external BOM, the module integrates a MAC, Baseband Processor, RF Transceiver with power amplifier, a frequency reference and an antenna. The module comes with a comprehensive API set to make software integration quick and seamless. Based on Redpine Signals 802.11n SoC RS9110, it is designed to provide wireless connectivity over 2.4 Ghz band to devices that have a UART or SPI interface.

Features

• 802.11b/g/n, operation over 2.4 Ghz band
• Wi-Fi Direct with support for both Access Point and client modes
• Enterprise Security - EAP-TLS, EAP-TTLS, EAP-FAST, PEAP-MSHCAP-V2
• Integrated TCP/IP stack, HTTP server, DHCP Server
• Host interface through UART and SPI
• Integrated antenna and uFL connector for external antenna
• Ultra low power operation with power save modes
• Single supply 3.1 to 3.6 V operation

RS-WC-301

RS-WC-301

RS-WC-301 belongs to the WiSeConnect™ family of advanced Wi-Fi modules. It is a fully integrated 802.11 b/g/n module with advanced features for M2M, industrial, medical, enterprise and IOT (Internet of Things) applications. Powered with WiFi-Direct™, it can directly communicate with smartphones and tablet PCs over without an Access Point based infrastructure. Integrated with Enterprise Security as well as TCP/IP and WLAN stacks, it can be designed quickly into any Host platform for secure and standards based WiFi connectivity in a variety of environments. Requiring no external BOM, the module integrates a MAC, Baseband Processor, RF Transceiver with power amplifier, a frequency reference and an antenna. The module comes with a comprehensive API set to make software integration quick and seamless. Based on Redpine Signals 802.11n SoC RS9110, it is designed to provide wireless connectivity over 2.4 Ghz band to devices that have a UART or SPI interface.

Features

• 802.11 a/b/g/n, operation over 2.4 and 5 Ghz bands
• Wi-Fi Direct with support for both Access Point and client modes
• Enterprise Security - EAP-TLS, EAP-TTLS, EAP-FAST, PEAP-MSHCAP-V2
• Integrated TCP/IP stack, HTTP server, DHCP Server
• Host interface through UART and SPI
• Integrated antenna and uFL connector for external antenna
• Ultra low power operation with power save modes
• Single supply 3.1 to 3.6 V operation