RS-SAM3S-220X

The RS-SAM3S-220x is a 802.11n Wi-Fi® card for the SAM3S-EK that can used to quickly add Wi-Fi connectivity to applications based on the Atmel SAM3 platform. The card can be plugged into a header on the SAM3S-EK evaluation Kit and configured and operated using the SAM3S-EK as the host platform. The Wi-Fi add-on card comes with complete software, API-set and documentation to assist developers quickly integrate Wi-Fi. Demo applications along with source code are also provided to increase the ease and speed of integration and evaluation.

RS-SAM3S-220X Features

• Compliant to 802.11b/g and single stream 802.11n
• Supports all Wi-Fi client security protocols (WEP, WPA/WPA2-PSK)
• Supports TCP, UDP, ICMP, DHCP, ARP, IGMP, DNS
• Reference design certified for FCC/IC/CE
• RoHS compliant
• Integrated with MCU like a peripheral
• Full source code for API library and demo application
• Supports SPI interface
• Integrated antenna, frequency reference and low-frequency clock
• Ultra-low-power operation with power save modes
• Ad-hoc and infrastructure modes for maximum deployment flexibility
• Comprehensive module documentation for design ease
• Single supply 3.1 to 3.6V operation

RS-UC3L0-220X

The RS-UC3L0-220x is a 802.11n Wi-Fi® card for UC3L0-Xplained Kit, that can used to quickly add Wi-Fi connectivity to applications based on the Atmel UC3L0 platform. The card can be plugged into a header on the evaluation Kit and configured and operated using the UC3L0 Kit as the host platform. The Wi-Fi add-on card comes with complete software, API-set and documentation to assist developers quickly integrate Wi-Fi into their applications. Demo applications along with source code are also provided to increase the ease and speed of integration and evaluation.

RS-UC3L0-220x Features

• Compliant to 802.11b/g and single stream 802.11n
• Supports all Wi-Fi client security protocols (WEP, WPA/WPA2-PSK)
• Supports TCP, UDP, ICMP, DHCP, ARP, IGMP, DNS
• Reference design certified for FCC/IC/CE
• RoHS compliant
• Integrated with MCU like a peripheral
• Full source code for API library and demo application
• Supports SPI interface
• Integrated antenna, frequency reference and low-frequency clock
• Ultra-low-power operation with power save modes
• Ad-hoc and infrastructure modes for maximum deployment flexibility
• Comprehensive module documentation for design ease
• Single supply 3.1 to 3.6V operation

RS-XMEGA-220X

The RS-XMEGA-220x is a 802.11n Wi-Fi® card for the XMEGA-A3BU Xplained Kit that can used to quickly add Wi-Fi connectivity to applications based on the Atmel Xmega platform. The card can be plugged into a header on the kit and configured and operated using the kit as the host platform. The Wi-Fi add-on card comes with complete software, API-set and documentation to assist developers quickly integrate Wi-Fi. Demo applications along with source code are also provided to increase the ease and speed of integration and evaluation.

RS-XMEGA-220X Features

• Compliant to 802.11b/g and single stream 802.11n
• Supports all Wi-Fi client security protocols (WEP, WPA/WPA2-PSK)
• Supports TCP, UDP, ICMP, DHCP, ARP, IGMP, DNS
• Reference design certified for FCC/IC/CE
• RoHS compliant
• Integrated with MCU like a peripheral
• Full source code for API library and demo application
• Supports UART interface
• Integrated antenna, frequency reference and low-frequency clock
• Ultra-low-power operation with power save modes
• Ad-hoc and infrastructure modes for maximum deployment flexibility
• Comprehensive module documentation for design ease
• Single supply 3.1 to 3.6V operation

RS-SAM9-02X

ATMEL has multiple ARM based platforms available for evaluation. Redpine has created Wi-Fi® companion cards to be used with ATMEL platforms for easy and intuitive Wi-Fi support.

The RS-SAM9-02X is an 802.11b/g/n capable Wi-Fi® companion card for SAM9-EK platform. The companion card enables developers to add wireless capability to different SAM9 processors. The card can be plugged into the SDIO slot of the processor platform.

The companion card comes with complete driver binaries for Linux operating system along with iPerf wireless application. The software and guide enables developers to reduce their integration time and speed up time to market.

Redpine Signals has created Wi-Fi software packages to be used with the following platforms on Linux operating system

• SAM9M10G45-EK
• SAM9G35-EK
  

RS-SAM9-02X Features

• Compliant to 802.11b/g/n/h/i/k
• 2.4GHz Frequency Band support
• 802.11n features for high throughput and extended range
• Supports all Wi-Fi client security protocols (WEP, WPA/WPA2-PSK)
• Supports SDIO and SPI interface
• Integrated antenna, frequency reference and low-frequency clock
• Microwave co-axial connector switch
• WLAN software with host driver for Linux and Android
• Ultra-low-power operation with power save modes
• Ad-hoc and infrastructure modes for maximum deployment flexibility
• Single supply 3.1 to 3.6V operation
• Reference design certified for FCC/IC/CE

RS9110-N-11-24 Evaluation Board UART interface

The Evaluation Kit for the RS9110-N-11-24 module offers users a flexible way of evaluating the features and performance of the module comprehensively. The kit consists of an evaluation board (EVB) with the module, a frequency reference and an antenna mounted, a serial cable, a USB power adapter, related software and documentation. The EVB can be connected to a Host system through the UART or SPI interfaces.

In the case of UART, the EVB can be connected to a PC using the serial cable or to the user's own EVB/PCB through custom connectors for the purposes of development and evaluation. From a PC, the user can configure the RS9110-N-11-24 EVB using a Hyperterminal application using AT commands or the Wi-Fi Configuration Utility supplied as part of the software kit. In the case of SPI, the user would have to connect to the Host PCB using customer connectors.

In addition to the Wi-Fi Configuration Utility which works in Windows OS, the software kit also includes reference driver software and custom applications for UART and SPI which can be used to open and close sockets (TCP, UDP, Listening TCP) inside the RS9110-N-11-24 module and exchange data with a Peer PC over WLAN. Source code for these applications and driver is also provided as reference.

Features

• Option to connect to Host over UART and SPI
• EVB includes antenna and frequency reference
• Option to connect to PC or custom PCB over UART
• On-board RS232 driver IC to connect to a DB9 connector
• Software kit for UART includes Configuration Utility, Reference Drivers, Evaluation Applications for Windows and source code
• Software kit for SPI includes Reference Drivers, Evaluation Applications for Linux and source code
• EVB has provision to connect peripherals to GPIO signals of the module
• Option to feed power through USB or DC jack (5V)
• Option to select Power-On-Reset or Push-Button Reset

RS9110N-11-22-05 Evaluation Board

RS9110-N-11-22-05: Part with uFL connector for external antenna

RS9110-N-11-22-(xx)

The RS9110-N-11-22-(xx) module from Redpine's Connect-io-n™ family of products is a complete IEEE 802.11bgn based wireless device server that directly provides a wireless interface to any equipment with a serial or SPI interface for data transfer. It integrates a MAC, Baseband processor, RF transceiver with power amplifier, a frequency reference, and an antenna in hardware; and all WLAN protocol and configuration functionality, networking stack in embedded firmware to make a fully self-contained 802.11n WLAN solution for a variety of applications. No WLAN or networking functionality is required on the host MCU. The module is based on Redpine's 802.11n chipset - RS9110

Features

• Compliant to 802.11b/g and single stream 802.11n
• Self-contained serial-to-wireless functionality - requires very little host processor bandwidth
• WPA/WPA2-PSK, WEP, TKIP modes of security
• Host interface: UART and SPI, selectable through a hardware pin
• Integrated TCP/IP stack, with option to bypass in SPI mode through software configuration
• Configuration through AT commands and SPI frames
• Integrated antenna, frequency reference, and low-frequency clock
• Ultra low power operation with power save modes
• Ad-hoc and infrastructure modes for maximum deployment flexibility
• Single supply 3.1 to 3.6 V operation
• Certification : Module is based on RS9110-N11-02 which is certified by FCC, IC and CE.

RS9110N-11-22-04 Evaluation Board

802.11 bgn 2.4GHz with integrated antenna

RS9110-N-11-22-(xx)

The RS9110-N-11-22-(xx) module from Redpine's Connect-io-n™ family of products is a complete IEEE 802.11bgn based wireless device server that directly provides a wireless interface to any equipment with a serial or SPI interface for data transfer. It integrates a MAC, Baseband processor, RF transceiver with power amplifier, a frequency reference, and an antenna in hardware; and all WLAN protocol and configuration functionality, networking stack in embedded firmware to make a fully self-contained 802.11n WLAN solution for a variety of applications. No WLAN or networking functionality is required on the host MCU. The module is based on Redpine's 802.11n chipset - RS9110

Features

• Compliant to 802.11b/g and single stream 802.11n
• Self-contained serial-to-wireless functionality - requires very little host processor bandwidth
• WPA/WPA2-PSK, WEP, TKIP modes of security
• Host interface: UART and SPI, selectable through a hardware pin
• Integrated TCP/IP stack, with option to bypass in SPI mode through software configuration
• Configuration through AT commands and SPI frames
• Integrated antenna, frequency reference, and low-frequency clock
• Ultra low power operation with power save modes
• Ad-hoc and infrastructure modes for maximum deployment flexibility
• Single supply 3.1 to 3.6 V operation
• Certification : Module is based on RS9110-N11-02 which is certified by FCC, IC and CE.

Product Variants

• RS9110-N-11-22-04: Part with integrated antenna
• RS9110-N-11-22-05: Part with uFL connector for external antenna

RS9110-N-11-02 Evaluation Board

The RS9110-N-11-02 evaluation board (EVB) is a complete IEEE 802.11bgn Wireless LAN evaluation platform for the RS9110-N-02 802.11bgn WLAN module. The RS9110-N-11-02 module is mounted on the EVB along with other supporting components including a 40 MHz reference oscillator, antenna and other passive components. The RS9110-N-11-02 is a high-performance, ultra low-power WLAN module providing IEEE 802.11n functionality in the single stream mode in the 2.4 GHz band. The board connects to a host processor through SDIO or SPI interfaces. It also provides the connectivity for the WLAN module to the Vector Signal Generator (VSG) and Vector Signal Analyzer (VSA) through a microwave coaxial connector switch mounted on the EVB. The RS9110-N-11-02 evaluation board facilitates the integration of the module into a host platform and its performance measurement.

Evaluation Board Features

• Supports IEEE 802.11bgn operation
• Frequency Band - 2.4GHz
• Operating channels
  o USA – Channels 1 to 11
  o Japan – Channels 1 to 14
  o Europe – Channels 1 to 13
• Integrated omni directional chip antenna
• 40 MHz, 20-ppm reference oscillator
• Connectors for power measurement
• Microwave coaxial connector switch
• Support for SDIO and SPI host interfaces
• Supply voltage of 3.1V to 3.6V
• It can be powered through SDIO or SPI interface, or through external power supply
• 802.11n drivers and configuration tools for Windows XP, Linux and Windows CE platforms

RS9110-N-11-03 Evaluation Board

The RS9110-N-11-03 evaluation board (EVB) is a complete IEEE 802.11abgn Wireless LAN evaluation platform for the RS9110-N-03 802.11abgn dual-band WLAN module. The RS9110-N-11-03 module is mounted on the EVB along with other supporting components including a 40 MHz reference oscillator, antenna and other passive components. The RS9110-N-11-03 is a high-performance, ultra low-power WLAN module providing IEEE 802.11n functionality in the single stream mode both in the 2.4 GHz and 5GHz band. The board connects to a host processor through SDIO or SPI interfaces. It also provides the connectivity for the WLAN module to the Vector Signal Generator (VSG) and Vector Signal Analyzer (VSA) through a microwave coaxial connector switch mounted on the EVB. The RS9110-N-11-03 evaluation board facilitates the integration of the module into a host platform and its performance measurement.

Features

• Supports IEEE 802.11abgn operation
• Frequency Bands - 2.4GHz and 5GHz
• Operating channels in 2.4GHz
  • USA – Channels 1 to 11
  • Japan – Channels 1 to 14
  • Europe – Channels 1 to 13
• Operating channels in 5GHz:
• Lower Band - 36, 40, 44, and 48
• Mid Band - 52, 56, 60 and 64
• High Band - 100 to 140
• Upper Band - 149, 153, and 157
• Integrated omni directional chip antenna
• 40 MHz, 20-ppm reference oscillator
• Connectors for power measurement
• Microwave coaxial connector switch
• Support for SDIO and SPI host interfaces
• Supply voltage of 3.0V to 3.6V
• It can be powered through SDIO or SPI interface, or through external power supply
• 802.11n drivers and configuration tools for Windows XP, Linux and Windows CE platforms