AMS – New Magnetic Position Sensors with System-in-Chip-Technology & ISO26262 safety compliance

ams AG extended its portfolio in automotive safety compliant sensors with the release of its first magnetic position sensors fully developed using the automotive industry’s programme for ISO26262 safety compliance.

The launch of the new sensor series also includes the introduction of ams’ first magnetic position sensor in a System-in-Package (SiP) format, a space savings package, that enables lower system costs and the placement of the sensor device in environments, that are prohibitive to PCB based packages.

ams’ new 70-series high-resolution angular position sensors are ideally suited  for precise and absolute angle measurement. The 70-series position sensors are available with an analog output interface (AS5170A / AS5171A / AS5270A) or a digital output interface (AS5170B / AS5171B / AS5270B).

Based on Hall-sensor technology, this device series measures the orthogonal component of the magnetic flux density in the Z field direction (Bz) over a full-turn rotation, and compensates for external magnetic stray fields with a robust architecture based on a 14-bit sensor array and analog front-end.

A subrange can be programmed to achieve the best resolution for the application. To measure the angle, only a simple two-pole target magnet rotating over or under the center of the package is required. The absolute angle measurement provides an instant indication of the target magnet’s angular position.

The 70-series position sensors operate at a supply voltage of 5V, and the supply and output pins are protected against overvoltage up to +20V. In addition, the supply pins are protected against reverse polarity up to –20V.

 

Benefits:

• Accurate angle measurement
• Provides high-resolution/high-accuracy measurements even with small angular excursions
• Higher durability and lower system costs (no magnetic shielding needed)
• Ideal solution for safety-critical automotive applications
• SiP Package (Integrated sensor + decoupling capacitors in a single package for improved system ESD/EMC performance and lower system costs)

Features:

• 12-bit resolution @ 90° minimum arc
• Low-output noise, low-inherent INL
• Magnetic stray field immunity
• Functional safety, diagnostics, dual-redundant chip version
• AEC-Q100 Grade 0 qualified
• System cost reduction – no PCB or additional components needed

Applications:

• Brake and gas pedals
• Throttle valve and tumble flaps
• Steering angle sensors
• Chassis ride height
• EGR
• Fuel-level measurement systems
• 2/4WD Switch
• Contactless potentiometers 

 

 

 

Summary AS517x Magnetic Position Sensors for ful ISO26262 safety compliance:

 

 

 

To receive even more information like technical data sheets or price information please contact an Ineltek office within your area or contact us at info@ineltek.com.

Contact Print Go Back Top