Design-In-Expertise And Service
Search for ...
Search:
Manufacturer Category Article Free text

Atmel Expands Ultra-low power SAM G series

New SAM G54/55 deliver industry’s smallest form factor for Cortex-M4 MCUs with low power and high performance for IoT, Wearables, and Sensor Hub Management

 

The new award winning SAM G Cortex-M4-based MCUs will announce two new additions to the series, the SAM G54 and SAM G55. Targeting the rapidly emerging Internet of Things (IoT) market including wearables, sensor hub management, healthcare, gateways, bridges, and audio devices, the new products deliver the right feature mix of higher performance, ultra-low power, smaller form factors and more SRAM providing an optimized solution for battery-operated devices and any other application needing high processing power in a small footprint. The G54 and G55 include all the features of the current SAM G series including an Atmel | SMART ARM® Cortex™-M4 MCU + FPU (floating point unit), integrated sensor fusion algorithms, down to 2.84 x 2.84mm package, high-performance frequency of up to 120MHz, ultra-low power down to 102µA/MHz in active mode, and down to 5µs wake-up.

In order to maintain energy efficiency, many smart, connected devices use a sensor hub to aggregate and manage the sensors in the device, converting the information into usable data to improve power efficiency and performance. The new SAM G55 gives designers the option to determine how much SRAM they will require to retain in sleep mode in order to achieve lower and better power efficiency for their designs by utilizing SRAM power banking.

SAM G54 & G55 Key Benefits

  • Down to 100 uA/MHz in active
  • Down to 3 us wake-up
  • Down to 2.84 x 2.84 mm package size

Key Features

  • High-performance throughput and efficiency with a Cortex M4-based MCU and FPU
  • Up to 512KB of Flash and up to 160KB of SRAM
  • SRAM power banking
  • Down to 2.84 X 2.84mm 49-ball WLCSP with 0.4mm pitch
  • Flexible serial peripherals and ultra-low power ADC
  • USB Host and Device
  • Peripheral Event System and SleepWalking
  • Atmel ultra-low power picoPower technology
  • 64-pin QFP and QFN package options
 
SAM G54
SAM G55
Frequency
96 MHz
120 MHz
Flash
512kB
512kB
SRAM
96kB
160kB
UART
2
2
USART (UART + SPI)
1
2
SPI
1
2
I2C master
2 @ 400kbit
4 @ 400kbit
I2C slave
1 @ 3.4Mbit
1 @ 3.4Mbit
FS USB
Host / Dev
BootROM
Yes
12-bit ADC
8 ch @ 500 ksps
8 ch @ 500 ksps
I2S / PDM
2
2
PLL
2
2
Hardware CRC
Yes
Cache
16KB
pins
49
49/64
Packages
WLCSP – 3.07×3.07
WLCSP – 2.84×2.84
QFP & QFN
Voltage range
1.62V – 3.6V
1.62V – 3.6V

Availability

Available SAM G54 devices can be found here.

Available SAM G55 devices:

  • ATSAMG55G19A-AU (QFP): Available now
  • ATSAMG55G19A-UUT (WCLSP): Available now
  • ATSAMG55G19A-MU (QFN): Available now

Development Support

To accelerate the design, a SAM G55 Xplained Pro evaluation kit is available for the SAM G55 series. The ATSAMG55-XPRO evaluation board includes an embedded debugger and the Atmel Software Framework. The kit is also fully supported by third party partners IAR and Keil.

 

To receive more information please contact an Ineltek office within your area.

Or contact us at info@ineltek.com